Can the ASUS TUF RTX 3080 10GB still mine cryptocurrency profitably in Australia in 2026?

Since Ethereum merge in September 2022 the RTX 3080 primary GPU mining targets are Ethash-compatible chains like ETC and ETHW, Ergo using Autolykos, Ravencoin using KawPow, Flux using ZelHash, and Kaspa using KHeavyHash. At Australian electricity rates of $0.25-$0.35 per kWh profitability is coin-dependent and fluctuating. The RTX 3080 10GB VRAM provides algorithm flexibility that 8GB cards lack. Run WhatToMine with your tariff and current coin prices to identify the most profitable algorithm at any given time.

What power draw should I expect from the ASUS TUF RTX 3080 when mining?

Stock the RTX 3080 draws 320-350 watts under full mining load. With a power limit reduction to 70-80 percent targeting 220-250 watts you can maintain 85-90 percent of peak mining hashrate while significantly improving efficiency and reducing electricity cost. This power tuning via MSI Afterburner or HiveOS OC settings is standard practice for Australian GPU miners managing electricity costs. Ensure your PSU is rated for continuous supply at the set power limit with adequate headroom.

Is the ASUS TUF RTX 3080 good for dual-use gaming and mining in Australia?

Yes. The TUF RTX 3080 is one of the best dual-use GPU options available. Its triple-fan TUF cooler handles both sustained gaming and mining thermal loads efficiently and Asus robust power delivery ensures stable operation. Many Australian miners run their RTX 3080 for mining during low-electricity-rate periods overnight and use it for gaming during the day. The card build quality and robust VRM design support long-term continuous loads better than budget alternatives.

What are the V1 vs V2 revision differences on the RTX 3080 and does it affect mining performance?

The RTX 3080 V2 also called LHR or Lite Hash Rate introduced a hardware hash rate limiter targeting Ethash. Post-Ethereum merge this limiter is largely irrelevant as ETH is no longer mineable. Both V1 and V2 RTX 3080 cards perform identically on current GPU-mineable algorithms including Ergo, KawPow, and KHeavyHash. The ASUS TUF SKU covers both revisions depending on production batch so verify the variant with MinerHub if this is relevant to your use case.

Does MinerHub provide warranty and local support for the ASUS TUF RTX 3080 in Australia?

Yes. The ASUS TUF RTX 3080 is covered by ASUS manufacturer warranty and sold with full Australian Consumer Law protections through MinerHub. We ship Australia-wide from Perth WA with same-day dispatch on business day orders before 2:00 PM AWST. Our team can assist with driver configuration, mining software setup for HiveOS and NiceHash, and OC profile recommendations. Contact hello@minerhub.com.au for support or warranty claims.

ASUS TUF Gaming RTX 3080 10GB GDDR6X graphics card front view showing triple Axial-tech fan cooler

ASUS Mining GPU

ASUS TUF Gaming RTX 3080 10GB GDDR6X — 1710 MHz GPU

Name: ASUS TUF Gaming RTX 3080 10GB GDDR6X — 1710 MHz GPU
Brand: ASUS
SKU: TUF-RTX3080-10G-GAMING
Price: 899.0 AUD
Availability: InStock
Rating: 4.78 (27 reviews)

4.8 27 reviews

$899.00

Incl. GST · Free AU shipping on orders over $50

In Stock

Qty

AU Warranty
Backed

Fast AU
Shipping

Secure
Checkout

Product Details

The ASUS TUF Gaming RTX 3080 10GB GDDR6X delivers NVIDIA Ampere architecture in a military-grade chassis built for sustained performance. With 8,704 CUDA cores on the GA102 die, 2nd-gen RT cores for hardware ray tracing, and 3rd-gen Tensor cores for DLSS AI upscaling, factory-overclocked to 1710 MHz in Gaming Mode, the TUF RTX 3080 handles 4K gaming, GPU-accelerated creative workloads, and intensive GPU compute tasks without thermal compromise.

The GDDR6X memory technology on the RTX 3080 is a step change from GDDR6 — using PAM4 (Pulse Amplitude Modulation 4) signalling to achieve 19 Gbps per pin versus GDDR6's typical 14–16 Gbps. Across the 320-bit memory bus, this delivers 760 GB/s of memory bandwidth — a figure that benefits both gaming workloads and GPU mining algorithms that are memory-bandwidth-bound. For compute tasks including deep learning inference and GPU rendering, the RTX 3080's Tensor cores and CUDA throughput rank it significantly above the previous-generation RTX 20-series.

The ASUS TUF design features a triple-fan cooling system with two ball-bearing fans and one dual-ball-bearing fan, a reinforced metal frame across all PCIe slots, and industrial-grade capacitors rated for longer operational lifespans. Auto-Extreme manufacturing uses 100% automated production for enhanced quality consistency. HDMI 2.1 outputs enable 8K @ 60Hz or 4K @ 144Hz display configurations. The 3 × 8-pin PCIe power requirement and 850W PSU recommendation make this a dedicated, power-aware build component.

For GPU miners in Australia, the RTX 3080's 10GB GDDR6X on a 320-bit bus and Ampere compute architecture deliver competitive hashrates on ETCHash, KawPow (Ravencoin), and Autolykos2 (Ergo). Compatible with all major GPU mining software including T-Rex, lolMiner, NiceHash, and GMiner. At 320W TGP, best paired with a dedicated 850W+ PSU in open-frame mining rig configurations.

Specification	Value
PERFORMANCE
GPU Architecture	NVIDIA Ampere (GA102 — 8nm Samsung)
CUDA Cores	8,704
Boost Clock (Gaming Mode)	1,710 MHz
Boost Clock (OC Mode)	1,725 MHz
RT Cores	2nd-gen (hardware ray tracing — DXR 1.1)
Tensor Cores	3rd-gen (DLSS AI upscaling)
Mining Algorithms	ETCHash, KawPow (RVN), Autolykos2 (ERGO), and other Ampere-compatible algorithms
MEMORY
VRAM	10GB GDDR6X
Memory Bus	320-bit
Memory Speed	19 Gbps (PAM4 signalling)
Memory Bandwidth	760 GB/s
POWER
TGP (Total Graphics Power)	320W
Power Connectors	3 × 8-pin PCIe (8+8+8)
PSU Recommended	850W minimum
CONNECTIVITY
PCIe Interface	PCIe 4.0 x16
Display Outputs	HDMI 2.1 × 2, DisplayPort 1.4a × 3
Max Resolution	8K @ 60Hz
PHYSICAL
Cooling	ASUS TUF triple-fan (2 × ball-bearing + 1 × dual-ball-bearing)
Frame	Reinforced metal PCIe slot bracket
Dimensions	300 × 133 × 53 mm
Slot Width	2.7-slot

Australian Consumer Law Notice: All products sold by MinerHub come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality. Manufacturer warranty terms apply in addition to your statutory rights. All hashrate, power, and efficiency figures are manufacturer-stated typical values. MinerHub does not guarantee mining returns or profitability.

ASUS TUF Gaming RTX 3080 10GB GDDR6X — 1710 MHz GPU

$899.00

Algorithm / Coin

Electricity (AUD/kWh)

⚡

Power (Watts)

🔌

Hashrate

Daily Revenue —

Daily Power Cost —

Daily Profit —

Monthly Profit —

RESOURCES

Need Help Setting Up?

Getting your mining hardware up and running doesn't have to be complicated. Whether it's your first miner or you're expanding an existing setup, our step-by-step guides walk you through everything — from unboxing and power requirements to pool configuration and first hashrate.

Written specifically for Australian home miners, each guide covers 240V wiring considerations, local electricity rate context, and practical tips we've learned from setting up hundreds of machines across WA, QLD, and NSW.

Browse All Guides

Recommended Guide

Step-by-Step Guide · Australian Focused

How to Build a 6-GPU Mining Rig From Scratch (Australian Parts List)

Everything you need to assemble a multi-GPU mining rig — motherboard, risers, PSU sizing, frame layout, and OS configuration with an Australian parts focus.

Read the full guide →