The Elphapex DG Home 1 is a purpose-built home ASIC miner for the Scrypt algorithm, delivering 2,100 MH/s of hashrate at 630W — designed from the ground up to run inside a home without the acoustic and thermal footprint of a commercial-grade machine. Mining Dogecoin (DOGE) and Litecoin (LTC) simultaneously via merged mining, the DG Home 1 sits in the strongest segment of the altcoin ASIC miner market for Australian home operators: high-demand coins, proven dual-revenue model, and an efficiency ratio of 0.3 J/MH that reflects genuine engineering restraint.
Elphapex built the DG Home 1 specifically for the residential mining use case. Noise is rated at 50 dB — audible but comparable to a desktop PC under load, making it viable in a home office, garage, or spare room with modest acoustic treatment. The unit draws power from a standard AC outlet with no external PSU required, accepting 100–240V input at 50/60Hz. Australian 240V/50Hz households require no modifications — plug in, configure via the web interface, and mining begins. At 630W, the DG Home 1 sits within the capacity of a standard 10A GPO circuit when run as a single unit, or a 15A or 20A dedicated circuit when scaling to multiple machines.
Dogecoin and Litecoin are mined simultaneously via Scrypt merged mining — a protocol-level feature that means you earn both DOGE and LTC from the same hashrate at no additional power cost. This dual-revenue structure is a key reason Scrypt altcoin mining has remained one of the more resilient home mining strategies, as the combined LTC+DOGE reward stream provides broader exposure than single-coin miners. The DG Home 1's 2.1 GH/s output places it well above the entry-level Scrypt home miners and into a tier where pool contributions generate consistent daily output.
Setup follows the standard ASIC workflow: connect via Ethernet, access the device's web dashboard through your browser, enter your pool URL, worker name, and wallet addresses for both DOGE and LTC, and mining is live. The DG Home 1 is compatible with major Scrypt pools including ViaBTC, F2Pool, and Litecoinpool. For Australian operators already running a Scrypt home setup, the DG Home 1 pairs naturally with the Goldshell Mini-DOGE III, or serves as a standalone capable machine for those entering Dogecoin and Litecoin mining for the first time. The Fluminer L1 is the natural comparison point — both are home-class Scrypt ASICs worth evaluating side by side.
| Specification |
Value |
| PERFORMANCE |
| Algorithm |
Scrypt |
| Hashrate |
2,100 MH/s (2.1 GH/s) ± 3% |
| Power Efficiency |
0.3 J/MH |
| Compatible Coins |
Dogecoin (DOGE), Litecoin (LTC), Bellscoin (BELLS) — merged mining |
| POWER |
| Power Consumption |
630W ± 10% |
| Input Voltage |
AC 100–240V / 50–60Hz (240V/50Hz Australian standard compatible) |
| PSU |
Integrated / included — no external PSU required |
| HARDWARE |
| Cooling |
Air-cooled (integrated fan array) |
| Noise Level |
≤50 dB |
| Connectivity |
Ethernet RJ45 |
| Management Interface |
Web UI (browser-based) |
| Software Compatibility |
Standard Stratum pool protocol (DOGE + LTC merged mining) |
| PHYSICAL |
| Dimensions |
410 × 370 × 135 mm |
| Weight |
10.3 kg |
| Operating Temp. |
5°C to 65°C |
| Humidity |
5–95% (non-condensing) |
| Warranty |
180 days manufacturer warranty |
Australian Consumer Law Notice: All products sold by MinerHub come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality. Manufacturer warranty terms apply in addition to your statutory rights. All hashrate, power, and efficiency figures are manufacturer-stated typical values. MinerHub does not guarantee mining returns or profitability.
