Goldshell SC-LITE — 4.4 TH/s Siacoin ASIC Miner
Goldshell's SC-LITE is the purpose-built ASIC for the Blake2B-Sia algorithm, delivering 4.4 TH/s of Siacoin hashrate at 216 J/TH efficiency. Released in January 2024 with Goldshell's latest-generation compute chips, it brings serious SC mining performance into a home-friendly form factor — PSU included, dual-fan cooled, and quiet enough at 55 dB to run in a home office or garage without dedicated soundproofing.
4.4
TH/s Hashrate
±5% · Blake2B-Sia
950W
Power Draw
±5% · PSU included
216
J/TH Efficiency
0.216 J/GH
55
dB Noise
Dual fan · home-ready
Mineable coins
Siacoin · SC
Blake2B-Sia algorithm
Sia network
Decentralised storage
Key features
PSU included — Goldshell-branded wide-voltage power supply (100–240V) ships with the unit, no separate purchase required
Latest-generation Goldshell compute chips — January 2024 release with improved hashrate and energy efficiency over previous SC models
216 J/TH efficiency — among the most efficient Siacoin miners available, reducing per-coin electricity cost
55 dB noise level — quieter than industrial ASIC miners; suitable for home office, garage, or spare room deployment
Dual high-speed fans — active cooling with two fans maintains stable thermals under sustained full-load operation
Ethernet connectivity — wired RJ45 connection ensures stable pool communication and low-latency block submission
Browser-based web dashboard — configure pool, wallet address, and monitor hashrate via local IP — no software to install
Universal voltage input — 100–240V AC compatibility means Australian 240V mains works without a step-down transformer
Compact 230 × 200 × 290mm body — smaller footprint than comparable-hashrate industrial units, fits on a standard shelf
5–35°C operating range — designed for real-world home environments, not data-centre-only conditions
Getting started
1
Connect the included PSU to the miner and plug the AC power cord into a 240V Australian wall outlet or power board.
2
Run an Ethernet cable from the SC-LITE's RJ45 port to your router or switch — a wired connection is required (no Wi-Fi on this model).
3
Power on the miner and find its local IP address via your router's DHCP client list or a network scanning tool such as Advanced IP Scanner.
4
Open the IP address in a browser on any device on the same network to access the Goldshell web dashboard.
5
Enter your Siacoin pool URL, wallet address, and worker name. The miner will begin submitting shares within minutes.
Full specifications
Goldshell SC-LITE — Technical Specifications
| Specification |
Value |
| Manufacturer |
Goldshell |
| Model |
SC LITE |
| Release date |
January 2024 |
| Algorithm |
Blake2B-Sia |
| Mineable coin |
Siacoin (SC) |
| Hashrate |
4.4 TH/s ±5% — actual hashrate fluctuates by up to ±5%
|
| Power consumption |
950 W (at wall) ±5% — actual draw fluctuates by up to ±5%
|
| Power efficiency |
216 J/TH (0.216 J/GH) |
| PSU |
Included — Goldshell branded, 100–240V AC input |
| Input voltage |
100–240V AC universal (Australian 240V compatible) |
| Fans |
2 × high-speed axial fans |
| Noise level |
55 dB At maximum fan RPM under full load
|
| Network interface |
Ethernet (RJ45) — wired only |
| Management |
Browser-based web dashboard (local IP access) |
| Dimensions (L × W × H) |
230 × 200 × 290 mm |
| Net weight |
9.5 kg |
| Operating temperature |
5–35 °C Reduce max temp by 1°C per 300m above 900m altitude
|
| Operating humidity |
5–65% (non-condensing) |
MinerHub does not guarantee mining returns. Hashrate, power consumption, and efficiency figures are Goldshell-stated typical values; actual performance fluctuates ±5% depending on operating conditions, ambient temperature, pool configuration, and firmware version. Siacoin network difficulty and SC coin price change continuously — profitability calculations should be performed independently using current network data before purchase. A power cord suitable for Australian wall outlets (IEC C13/C14 or equivalent) may need to be sourced locally if not supplied with the unit — confirm with MinerHub at point of sale. MinerHub is not an authorised Goldshell service centre; warranty claims must be directed to Goldshell directly.
